SUBSCRIBE TO ACCESS PREMIUM CONTENT

A Look Back at the Porsche Panamericana Concept

Porsche filed an application to trademark the Pan Americana name on July 28, 2015. According to Auto Guide the application was filed with the Office for Harmonization in the Internal Market for “automobiles and structural parts therefor.” The name references the Carrera Panamericana endurance race car that ran in the 1950s, but while we’re not entirely sure what to make of the trademark application we remain hopeful that the Stuttgart brand will show a new concept at the Frankfurt motor show in September. It’s not the first time the name’s appeared on a Porsche concept…

Porsche raised eyebrows in 1989 when it unveiled a concept car called Panamericana at the Frankfurt Motor Show. Borrowed from an iconic race held in Mexico, the name suggested the concept was a no-compromise sports car – a lightweight version of the 911 ready to hit the track – but that was far from the case. The Panamericana was a bold-looking convertible that mixed 911 Targa and dune buggy styling cues into a oddly-proportioned-yet-futuristic package.

The Panamericana was designed by Steve Murkett under the supervision of design chief Harm Lagaay, a man whose name is also associated with the Porsche 924, the Ford Sierra and the BMW Z1. The car was based on the then-new 964-series Carrera 4 floor pan but it featured a bespoke body made out of carbon fiber and fiberglass in order to reduce weight.


Finished in an attractive shade of dark green, the Panamericana boasted a sleek silhouette that made it more aerodynamic than the aforementioned Carrera 4. The headlights were tilted at a sharp angle and the tail lamps were loosely inspired by those found on the 928, while the two air vents on the decklid paid a discreet homage to the 356.

Porsche Panamericana concept sketches by Steve Murkett

The roof was removable in three pieces and the rear window could be lifted off entirely. When installed, the roof panel was designed to be protected by a leather cover that attached to the car via large zippers inexplicably painted in purple.

Outside, the finishing touch was a set of 17-inch alloy wheels designed by Porsche and manufactured by Speedline. They were wrapped in Goodyear tires that featured hand-cut Porsche crests in the thread. The lack of any real fender flares made it possible to mount several different wheel sizes on the Panamericana, making it possible to transform the car from a track performer into an off-roader with only a jack, a wrench and a set of lugnuts.

Magazine Exotic Car Quarterly was fortunate enough to test the Panamericana when it came out and reported it stretched 165.4 inches (4200mm) long, 73.2 inches (1850mm) wide and 51.2 inches (1300mm) tall.

The interior was standard Carrera 4 fare save for a bespoke pair of bucket seats with four-point seatbelts and several touches of purple trim. The Germanic dashboard with its comprehensive array of gauges was lifted straight from the 4.

Pinky Lai and Harm Lagaay look over the Porsche Panamerica concept model in the viewing area
Pinky Lai and Harm Lagaay look over the Porsche Panamerica concept model in the viewing area
While the car was penned under the direction of Lagaay, nearly every other aspect of it was masterminded by Ulrich Bez, an engineer who made a name for himself by becoming CEO of Aston Martin several years ago. Bez opted to use an unmodified Carrera 4-sourced air-cooled flat-six that sent 250 horsepower and 229 lb-ft. of torque to all four wheels via a five-speed manual transmission. The car was capable of reaching 62 mph (100 km/h) from a stop in an estimated 5.8 seconds.

Following its debut in Frankfurt, the Porsche Panamericana concept was quickly shipped to Japan and exhibited at the Tokyo Motor Show. Lagaay hoped the convertible would be given the green light for a small production run but Porsche’s deep financial woes quickly put an end to all hopes of seeing the Panamericana in showrooms. However, its design heavily influenced the 993-series 911 and, to a lesser extent, the Boxster.

Porsche Panamericana concept sketch by Steve Murkett

Most sources claim two examples of the Panamericana were built: One to display at the Frankfurt and Tokyo shows, and another to give to Ferry Porsche as his 80th birthday present.

Interestingly, every Porsche employee at the time was given a 1/43-scale model of the car mounted on a bronze plaque. Many have survived, and they fetch a small fortune on popular auction sites around the world.


This article originally appeared on Ran When Parkedand was republished with permission.

.

Founded in 2012, Form Trends tirelessly covers the automotive design industry in all corners of the globe to bring you exclusive content about cars, design, and the people behind the products.